Steps to follow
Step 1: Gathering Materials
Gathering Materials. For this project you will needShaft gear motor, 2 plastic wheels with spokes,battery holder, stick,google eye, glue gun,,and glue stick.
Step 2: Turn the wheel backward
Turn the wheel backward, and fit the shaft .
Step 3: Fit the second wheel to the other shaft
Fit the second wheel to the other shaft.
Step 4: Apply some hot to connect the motor shaft to the wheel
Apply some hot to connect the motor shaft to the wheel.
Step 5: Connect the wires from the battery snap to the terminals
Connect the wires from the battery snap to the terminals.
Step 6: Adding traction
Add traction by squeezing a line of hot glue around only half of the outside of each wheel..
Step 7: Adding a strip of double-sided foam to the tape
Put a strip of double-sided foam tape on the top of the gearbox, for sticking on the battery
Step 8:Attach the battery to the gearbox
Attach the battery to the top of the gearbox.
Step 8:Attaching the front legs
Attach the front legs by gluing one wooden.
Step 8:Connect battery terminal to the battery
Connect one terminal of the battery snap to the battery.
